Shuttle NC02U

Hace poco tuvimos el placer de analizar el NC01U, el primer modelo de Shuttle con el formato Intel NUC. Hoy nos llega el NC02U, un modelo ligeramente más grande, sé que suena extraño, pero que sinceramente mejora a su predecesor en bastantes aspectos. A nivel de hardware, incorpora el nuevo procesador Intel Celeron 3855U y una salida 4K por Mini DisplayPort, pero hay más, así que no os podéis perder este review. Leer Análisis >

A continuación, describimos todas las características del equipo:

• Chassis
  • Barebone PC with a black plastic chassis
  • Dimensions: 142 x 142 x 42 mm (LWH) = 835 ml
  • Weight: 0.4 kg net, 1.2 kg gross
  • Hole for Kensington Lock
  • Includes vertical stand and 75 / 100 mm VESA mount
• Low Power Consumption
  • Power consumption in idle mode: 6.7~7.8 W, full load: 11.3 / 21.7 W (without/with graphics)
  • (measured with 2x 4 GB DDR3L SO-DIMM, 120 GB 2.5" SSD, Windows 10-1607 64 bit)
• Operation Position
  • 1) Horizontal
  • 2) Vertical with stand
  • 3) VESA-mounted behind an appropriate monitor
• Operation System
  • This barebone system comes without operating system.
    • It is compatible with:
      • - Windows 7, 64-bit
      • - Windows 8.1, 64-bit
      • - Windows 10, 64-bit
      • - Linux (e.g. Ubuntu, OpenSUSE, Fedora), 64-bit
• Processor
  • Model: Intel Celeron 3855U (ULV)
  • System-on-a-chip architecture (SoC): no chipset required
  • BGA1356 package - directly soldered onto the mainboard
  • Code name: Skylake-U (6th Generation Intel Core)
  • Cores / Threads: 2 / 2
  • Clock rate: 1.6 GHz
  • L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB
  • Memory controller: DDR3L-1600 Dual Channel (1.35 V)
  • TDP wattage: 15 W maximum
  • Manufacturing process: 14 nm
  • Maximum Tjunction Temperature: 100 °C
  • Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
  • Integrated graphics engine
• Cooling Fan
  • Built-in CPU cooling fan with 4 pin connector
  • Supports temperature-controlled RPM fan speed
• Integrated Graphics
  • Intel HD graphics 510 (Intel HD Gen. 9)
  • Two digital audio/video ports support two independent screens:
    • 1) DisplayPort 1.2 [1] supports 3840 x 2160 @ 60Hz
    • 2) HDMI 1.4b supports 3840 x 2160 @ 24Hz
  • Supports Ultra HD / 4K resolution
  • GPU clock rate: 300~900 MHz
  • Execution Units (EU): 12
  • Supports DirectX 12, OpenGL 4.4
  • Supports full H264, H265 8/10-bit, VP8/9, VC-1, AVC hardware decoding
  • Supports Quick Sync Video and Clear Video HD technology
  • Supports HD video plus multi-channel digital audio via a single cable
  • Dynamic, shared memory: up to 1.7 GB
  • Note: dual channel memory (two identical modules) is required for 4K Ultra-HD resolution (2160p) support.
• Mainboard / BIOS
  • AMI BIOS in 8 MByte EEPROM with SPI interface
  • Supports resume after power failure
  • Supports Wake on LAN (WOL)
  • Supports Power on by RTC Alarm
  • Supports booting from USB devices and SD card reader
  • Supports hardware monitoring and watch dog function
  • Supports Unified Extensible Firmware Interface (UEFI)
  • Supports Firmware TPM v2.0 (fTPM) since BIOS version NC02U000.103
• Power Adapter
  • External 65 W power adapter (fanless)
  • Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
  • Output: 19 V DC, max. 3.42 A, max. 65 W
  • DC Connector: 5.5 / 2.5 mm (outer/inner diameter)
• Memory support
  • 2x 204-pin SO-DIMM slot
  • Supports DDR3L-1600 (PC3-12800) SDRAM at 1.35 V
  • Supports Dual Channel mode
  • Supports a maximum of 16 GB per DIMM, maximum capacity: 32 GB
  • Supports two unbuffered DIMM modules (no ECC)
  • Note: This mainboard does only support 1.35V DDR3L memory modules. DDR3L has a lower operation voltage as DDR3.
• 2.5" Drive Bay
  • Supports one Serial ATA hard disk
  • or one SATA SSD drive in 6.35 cm / 2.5" format
  • Device height: 15 mm (max.)
  • Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
• Card Reader
  • Integrated SD card reader
  • Supports SD, SDHC and SDXC memory flash cards
  • Supports booting from SD card
• M.2 Slot for SSDs
  • The M.2 2280 BM slot provides the following interfaces:
    • - PCI-Express Gen. 2.0 X4 with up to 32 Gbps Data Transfer Speed
    • - SATA v3.0 (max. 6 Gbps)
  • It supports M.2 cards with a width of 22 mm
  • and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
  • Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key)
• Audio
  • Audio Realtek® ALC 662 High-Definition Audio Codec
  • 3.5 mm / 4-pole combo audio connector for headphones and microphone [2]
  • Digital multi-channel audio output: via HDMI and DisplayPort
• Gigabit LAN
  • Ethernet Controller Intel i211
  • Supports 10 / 100 / 1.000 MBit/s operation (Gigabit)
  • Supports WAKE ON LAN (WOL)
  • Supports network boot by Preboot eXecution Environment (PXE)
  • IEEE 802.3az Energy Efficient Ethernet (EEE)
  • Interface: PCIe v2.1
• Wireless LAN
  • Built-in M.2-2230-A/E WLAN card and internal antenna
  • Single-Chip 1T1R WLAN Controller Realtek RTL8188EE
  • Supports IEEE 802.11b/g/n, max. 150 Mbps up-/downstream
  • Security: WPA/WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x/i
• Front Panel connectors
  • USB 3.0 type A
  • USB 3.0 type C
  • SD card reader (supports SD, SDHC, SDXC)
  • Power button
  • Power LED (blue, blinking when in suspend mode)
  • HDD LED (orange)
• Back Panel connectors
  • DisplayPort 1.2 [1]
  • HDMI 1.4b
  • 2x USB 2.0
  • Gigabit LAN (RJ45)
  • Audio Combo Port for headphones and microphone (3.5 mm jack, 4-pole) [2]
  • DC-input connector for external power adapter
  • 2x perforation for optional external WLAN antennas
• Left Side connectors
  • Serial RS232 COM port (D-Sub, 9-pin)
  • This port is switchable to RS422 and RS485 in the BIOS setup
  • Note: The serial connector (COM port) cannot be used if NC02U is operated in vertical position.
• Always-On Jumper
  • By removing Jumper JP1 (please refer to the Quick Installation Guide)
  • the system will start unconditionally once power is applied. [4]
• Clear CMOS Jumper
  • Short Jumper JP2 for about 10 seconds in order to reset all BIOS configuration setting to factory default.
• Supplied Accessories
  • Multi-language Quick Installation Guide
  • Driver DVD for Windows
  • VESA mount set (two parts, made of steel, with 6 screws)
  • 2x aluminium stand with screws for vertical operation
  • Bracket for a 2.5" drive with 8 screws
  • Power adapter with AC power cord
• Environmental Spec
  • Operating temperature range: 0~40 °C [3]
  • Relative humidity range: 10~90% (non-condensing)