Shuttle NC03U

Por fin llega a nuestras manos la tercera generación de la serie NC0xU, la más económica de esta gama. En esta evolución el chasis no ha sufrido ningún cambio exterior, mientras que en el interior se encuentra el procesador Intel Celeron 3865U, la memoria es ahora DDR4 e incorpora nueva gráfica, la Intel HD610. Estas son las únicas diferencias con su predecesor, veamos si son suficientes.

A continuación, describimos todas las características del equipo:

• Chasis
• Barebone PC with a black plastic chassis Dimensions: 142 x 142 x 42 mm (LWH) = 835 ml Weight: 0.4 kg net, 1.2 kg gross
• Hole for Kensington Lock
• Includes vertical stand and 75 / 100 mm VESA mount
• Low Power Consumption Power consumption in idle mode under Windows 10: ca. 5 W
•    Operation Position
• 1) Horizontal
• 2) Vertical with stand
• 3) VESA-mounted behind an appropriate monitor
•    Operation System
• This barebone system comes without operating system. It is compatible with:
• - Windows 10, 64-bit
• - Linux 64-bit
•    Processor
• Model: Intel Celeron 3865U (ULV)
• System-on-a-chip architecture (SoC): no chipset required
• BGA1356 package - directly soldered onto the mainboard
• Code name: Kaby Lake-U (7th Generation Intel Core)
• Cores / Threads: 2 / 2
• Clock rate: 1.8 GHz
• L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB
• Memory controller: DDR4-2133 Dual Channel (1.2 V)
• TDP wattage: 15 W maximum
• Manufacturing process: 14 nm
• Maximum Tjunction Temperature: 100 °C
• Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2 Integrated graphics engine
•    Cooling fan
• Built-in CPU cooling fan with 4-pin connector Supports temperature-controlled RPM fan speed
•    Integrated Graphics
• Intel HD graphics 610
• GPU clock frequency: 300~900 MHz
• Execution Units (EUs): 12
• Two digital audio/video ports support two independent screens (dual monitoring): Supports Ultra HD / 4K resolution at 3840 x 2160 Pixels
• 1) DisplayPort 1.2 [1] supports Ultra HD @ 60 Hz
• 2) HDMI 1.4b supports Ultra HD @ 30 Hz
• Mainboard & BIOS
• AMI BIOS in 8 MByte EEPROM with SPI interface Supports resume after power failure
• Supports Wake on LAN (WOL)
• Supports Power on by RTC Alarm
• Supports booting from USB devices and SD card reader Supports hardware monitoring and watch dog function Supports Unified Extensible Firmware Interface (UEFI) Supports Firmware TPM v2.0 (fTPM)
• Power Adapter
• External 65 W power adapter (fanless)
• Input: 100~240 V AC, 50/60 Hz, max. 1.6 A Output: 19 V DC, max. 3.42 A, max. 65 W
• DC Connector: 5.5/2.5 mm (outer/inner diameter)
• Memory support
• 2x SO-DIMM slots with 260 pins
• Supports DDR4-2133 (PC4-17000) SDRAM at 1.2 V
• Supports Dual Channel mode
• Supports a maximum of 16 GB per DIMM, maximum total size: 32 GB Supports two unbuffered DIMM modules (no ECC or registered)
• Storage
• 2.5" Drive Bay
• Supports one Serial ATA hard disk
• or one SATA SSD drive in 6.35 cm / 2.5" format Device height: 15 mm (max.)
• Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
• Card Reader
• Integrated SD card reader
• Supports SD, SDHC and SDXC memory flash cards Supports booting from SD card   
• M.2 Slot for SSDs
• The M.2 2280 BM slot provides the following interfaces:
• - PCI-Express Gen. 2.0 X4 with up to 32 Gbps Data Transfer Speed
• - SATA v3.0 (max. 6 Gbps)
• It supports M.2 cards with a width of 22 mm
• and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
• Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs (with M key)
• Audio
• Audio Realtek® ALC 662 High-Definition Audio Codec
• 3.5 mm / 4-pole combo audio connector for headphones and microphone [2] Digital multi-channel audio output: via HDMI and DisplayPort
• Network
• Gigabit LAN
• Ethernet Controller Intel i211
• Supports 10 / 100 / 1.000 MBit/s operation (Gigabit)
• Supports WAKE ON LAN (WOL)
• Supports network boot by Preboot eXecution Environment (PXE) IEEE 802.3az Energy Efficient Ethernet (EEE), Interface: PCIe v2.1
• Wireless Network (WLAN)
• Built-in M.2-2230-A/E WLAN card and internal antenna Single-Chip 1T1R WLAN Controller Realtek RTL8188EE Supports IEEE 802.11b/g/n, max. 150Mbps up-/downstream Security: WPA/WPA2(-PSK), WEP 64/128-bit, IEEE 802.11x/i
• Front Panel connectors
• USB 3.0 type A
• USB 3.0 type C
• SD card reader (supports SD, SDHC, SDXC)
• Power button
• Power LED (blue, flashing when in suspend mode) HDD LED (orange)
• Back Panel connectors
• DisplayPort 1.2 [1]
• HDMI 1.4b
• 2x USB 2.0
• Gigabit LAN (RJ45)
• Audio Combo Port for headphones and microphone (3.5 mm jack, 4-pole) [2] DC-input connector for external power adapter
• 2x perforation for optional external WLAN antennas
• Left Side connectors
• Serial RS232 COM port (D-Sub, 9-pin)
• Note: The serial connector (COM port) cannot be used, if the NC03U is operated in vertical position.
•    Always-On Jumper By removing Jumper JP1 (please refer to the Quick Installation Guide), the system will start unconditionally once power is applied. [4]
•    Clear CMOS Jumper Short Jumper JP2 for about 10 seconds to restore factory settings of BIOS.
• Supplied Accessories
• Multi-language Quick Installation Guide
• Driver DVD for Windows
• VESA mount set (two parts, made of steel, with 6 screws) 2x aluminium stand with screws for vertical operation Bracket for a 2.5" drive with 8 screws
• Power adapter with AC power cord
•    Optional Accessories WLN-M: Wireless LAN module with two external antennas, supports WiFi IEEE 802.11n/ac (2.4 / 5 GHz) and Bluetooth 4.0
•    Environmental Spec Operating temperature range: 0~40 °C [3]
• Relative humidity range: 10~90% (non-condensing)
•    Conformity & Certifications
• EMI: CE, FCC, BSMI, RCM, R&TTE, VCCI
• Safety: CB, BSMI, ETL
• Other: RoHS, Energy Star, ErP
• This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
• (1) 2004/108/EC relating to electromagnetic compatibility (EMC),
• (2) 2006/95/EC relating to Electrical Equipment designed for use within certain voltage limits (LVD),
• (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP), (4) 1999/5/EC related to Radio and Telecommunications Terminal Equipment (R&TTE)