Shuttle NC10U

Shuttle presenta la cuarta generación de su gama XPC nano. En lugar de llamarla NC04U ha decidido pasar directamente al llamarlo NC10U. Este modelo mantiene exactamente el mismo chasis y puertos de salida que su predecesor. Como grandes diferencias, un nuevo procesador de Intel, el Celeron 4205U con los mismos hilos y velocidad que el modelo 3865U instalado en su predecesor, el NC03U. Los otros 2 cambios son: soporte para 4K60Hz por la salida HDMI y soporte para 32GB de memoria DDR4-2133. La salida HDMI 4K 60Hz es uno de los aspectos que criticamos en el modelo anterior, y que por lo que veo Shuttle ha solucionado. Leer Análisis >

A priori pocos cambios para uno de los NUC mas conocidos; ideal para ofimática, reproducción de video y navegación. No dejéis de leer porque seguro que os sorprende algún aspecto de este Nano PC.

Especificaciones:

• Chassis
• Barebone PC with a black plastic chassis
• Dimensions: 142 x 142 x 42 mm (LWH) = 847 ml
• Weight: 0.4 kg net, 1.2 kg gross
• Hole for Kensington Lock
• Includes vertical stand and 75 / 100 mm VESA mount
• Low Power Consumption
• Power consumption in idle mode with 2.5" SSD under Windows 10: ca. 6 W only
• Operation Position
• 1) Horizontal
• 2) Vertical with stand
• 3) VESA-mounted behind an appropriate monitor
• Operation System
• This barebone system comes without operating system.
• It is compatible with:
• Windows 10, 64-bit
• Linux, 64-bit
• Processor
• Model: Intel Celeron 4205U (ULV)
• System-on-a-chip architecture (SoC) with integrated memory and graphics controller: no chipset required
• FCBGA1528 package - directly soldered onto the mainboard
• Code name: Whiskey Lake U (8th Generation Intel Core)
• Cores / Threads: 2 / 2
• Clock rate: 1.8 GHz
• L1/L2/L3 Cache: 128 kB / 512 kB / 2048 kB
• TDP wattage: 15 W maximum
• Manufacturing process: 3rd-generation enhanced 14nm++
• Maximum Tjunction Temperature: 100 °C
• Supports 64-bit, VT-x (EPT), VT-d, Enhanced SpeedStep, NX bit, AES-NI, SSE 4.1/4.2
• Cooling Fan
• Built-in CPU cooling fan with 4-pin connector
• Supports temperature-controlled RPM fan speed
• Integrated Graphics
• Intel UHD Graphics 610
• GPU clock frequency: 300~900 MHz
• Execution Units (EUs): 12
• Supports DirectX 12
• Supports full H264, H265 8/10 bit, VP8/9, VC-1, AVC hardware decoding
• Supports Quick Sync Video and Clear Video HD technology
• Supports up to two independent screens:
• 1) DisplayPort 1.2 supports Ultra HD @ 60 Hz
• 2) HDMI 2.0a supports Ultra HD @ 60 Hz
• Mainboard / BIOS
• AMI BIOS in 8 MByte EEPROM with SPI interface
• Supports resume after power failure
• Supports Wake on LAN (WOL)
• Supports Power on by RTC Alarm
• Supports booting from USB devices and SD card reader
• Supports hardware monitoring and watch dog function
• Supports Unified Extensible Firmware Interface (UEFI)
• Supports Firmware TPM v2.0 (fTPM)
• Power Adapter
• External 65 W power adapter (fanless)
• Input: 100~240 V AC, 50/60 Hz, max. 1.6 A
• Output: 19 V DC, max. 3.42 A, max. 65 W
• DC cable ca. 175 cm with coaxial connector: 5.5 / 2.5 mm (outer/inner diameter)
• The DC-input of the computer supports 19V±5%.
• AC cable, ca. 170 cm, with flat, two-pole Europlug
• Memory support
• 2x SO-DIMM slot with 260 pins
• Supports DDR4-2133 (PC4-17000) SDRAM at 1.2 V
• Supports DDR4-2400/2666 at 2133 MHz
• Supports Dual Channel mode
• Supports a maximum of 32 GB per DIMM,
• maximum total size: 64 GB
• Supports two unbuffered DIMM modules (no ECC or registered)
• 2.5" Drive Bay
• Supports one Serial ATA hard disk
• or one SATA SSD drive in 6.35 cm / 2.5" format
• Device height: 15 mm (max.)
• Supports Serial-ATA III, 6 Gb/s (600 MB/s) bandwidth
• Card Reader
• Integrated SD card reader
• Supports SD, SDHC and SDXC memory flash cards
• Supports booting from SD card
• M.2 Slot for SSDs
• The M.2 2280 BM slot provides the following interfaces:
• PCI-Express Gen. 2.0 X4 with up to 2 GB/s data transfer rate
• SATA v3.0 (max. 6 Gbps)
• It supports M.2 cards with a width of 22 mm
• and a length of 42, 60 or 80 mm (type 2242, 2260, 2280).
• Supports M.2 SATA SSDs (with B+M key) and M.2 PCIe SSDs with NVMe (with M key)
• Audio
• Audio Realtek® ALC 662 High-Definition Audio Codec
• 3.5 mm / 4-pole combo audio connector for headphones and microphone [2]
• Digital multi-channel audio output: via HDMI and DisplayPort
• Gigabit LAN
• Ethernet Controller Intel i211
• Supports 10 / 100 / 1.000 MBit/s operation (Gigabit)
• Supports WAKE ON LAN (WOL)
• Supports network boot by Preboot eXecution Environment (PXE)
• IEEE 802.3az Energy Efficient Ethernet (EEE)
• Interface: PCIe v2.1
• Wireless LAN
• Built-in M.2-2230-A/E WLAN card and internal antenna
• Single-Chip 1T1R WLAN Controller Realtek RTL8188EE
• Supports IEEE 802.11b/g/n, max. 150 Mbps up-/downstream
• Security: WPA/WPA2(-PSK), WEP 64/128 bit, IEEE 802.11x/i
• Front Panel connectors
• USB 3.2 Gen 1 Type A (max. 5 Gbps, blue)
• USB 3.2 Gen 1 Type C (max. 5 Gbps)
• SD card reader (supports SD, SDHC, SDXC)
• Power button
• Power LED (blue, flashing when in suspend mode)
• HDD LED (orange)
• Back Panel connectors
• DisplayPort 1.2 [1]
• HDMI 2.0a
• 2x USB 2.0 Type A
• Gigabit LAN (RJ45)
• Audio Combo Port for headphones and microphone (3.5 mm jack, 4-pole) [2]
• DC-input connector for external power adapter
• 2x perforation for optional external WLAN antennas
• Left Side connectors
• Serial RS232 COM port (D-Sub, 9-pin)
• Note: The serial connector (COM port) cannot be used if the NC10U is operated in vertical position.
• Always-On Jumper
• By removing Jumper JP1 (please refer to the Quick Installation Guide)
• the system will start unconditionally once power is applied. [4]
• Clear CMOS Jumper
• Short Jumper JP2 for about 10 seconds to restore factory settings of BIOS.
• Supplied Accessories
• Multi-language Quick Installation Guide
• Driver DVD for Windows 10
• VESA mount set (two parts), made of steel,
• Six screws (4x M4x10, 2x M2.5x3)
• Bracket for a 2.5" drive with eight screws (M3x5)
• Two aluminium stands (110 mm width) with four screws M3x7 for vertical operation
• Four black, rounded rubber feet, ca. 10 mm diameter x 2.5 mm
• Two screws for mounting of M.2 cards
• Power adapter 65 W with AC power cord
• Optional Accessories
• WLN-M: Wireless LAN module with two external antennas, 
• supports WiFi IEEE 802.11n/ac (2.4 / 5 GHz) and Bluetooth 4.0
• Environmental Spec
• Operating temperature range: 0~40 °C [3]
• Relative humidity range: 10~90% (non-condensing)
• Conformity/Certifications
• EMI: CE, FCC, BSMI, RCM, RED, VCCI
• Safety: CB, BSMI, ETL
• Other: RoHS, Energy Star, ErP
• This device is classed as a technical information equipment (ITE) in class B and is intended for use in living room and office. The CE-mark approves the conformity by the EU directives:
• (1) 2014/30/EU relating to electromagnetic compatibility (EMC),
• (2) 2014/35/EU relating to Electrical Equipment designed for use within certain voltage limits (LVD),
• (3) 2009/125/EC relating to ecodesign requirements for energy-related products (ErP),
• (4) 2014/53/EU Radio Equipment Directive (RED)